
It is resistant to UV, ozone, fuels as well as weathering, hydrolysis and commonly used chemicals


INDUSTRIES
OIL AND GAS
FEATURES
- This Antistatic hose has an excellent abrasion resistance and a very high tensile strength. It is resistant to UV, ozone, fuels as well as weathering / hydrolysis and commonly used chemicals.
- It has a positive buoyancy when operated in sea water or fresh water.
- The hose meets the requirements set out in MIL-PRF-370J.
- The hose is manufactured in compliance with ISO 9001:2015 quality management system.
DESIGN
- Fuelman is a heavy duty Thermoplastic Polyurethane covered hose designed for transferring fuels, other liquid hydrocarbons or to be used as a general purpose Antistatic hose.
- The lay flat hose is designed using the state of the art “extrusion through the weave” technology, ensuring a very good bonding between cover and lining the textile weave.
- The antistatic property is ensured by dual longitudinal cooper wire straps attached to the hose body and which are connected to the end coupling.
ADVANTAGE
- Low weight.
- Easy deployment and retrieval.
- Less storage needed – Stored on reels or flaked in containers
- Long lengths + 200m
- Easy to access the copper wires for safe installation





TECHNICAL DATA
FUELMAN STANDARD
(Dimensions 1 1/2” to 4” only on request / minimum order quantity)
INTERNAL DIAMETER | WALL THICKNESS | WEIGHT | BURST PRESSURE | TENSILE STRENGTH | |||||
Inch | mm | Inch | mm | Lbs / Ft | Kg / m | Psi | Bar | x 1000 Lbs | Tons |
1 1/2 | 38,0 + 1,6 | 0,07 | 2,1 | 0,20 | 0,30 | 655 | 45 | 5,8 | 2,8 |
2 | 51,0 + 2,0 | 0,09 | 2,2 | 0,29 | 0,44 | 655 | 45 | 7,6 | 3,5 |
2 1/2 | 65,0 + 2.0 | 0,09 | 2,3 | 0,36 | 0,58 | 610 | 42 | 9,1 | 4,3 |
3 | 76,0 + 2.0 | 0,09 | 2,4 | 0,47 | 0,75 | 610 | 42 | 10,7 | 5,0 |
4 | 102,0 + 2,5 | 0,12 | 2,7 | 0,72 | 1,07 | 520 | 36 | 23,1 | 10,8 |
INTERNAL DIAMETER | WALL THICKNESS | WEIGHT | BURST PRESSURE | TENSILE STRENGTH | |||||
Inch | mm | Inch | mm | Lbs / Ft | Kg / m | Psi | Bar | x 1000 Lbs | Tons |
6 | 152 + 3,0 | 0,15 | 3,7 | 1,34 | 2,00 | 650 | 45 | 44,0 | 21,0 |
7 | 178 + 3,0 | 0,16 | 4,0 | 1,61 | 2,40 | 650 | 45 | 70,0 | 31,8 |
8 | 203 + 3,0 | 0,17 | 4,2 | 2,15 | 3,20 | 610 | 42 | 81,5 | 37,0 |
10 | 254 + 3,0 | 0,17 | 4,3 | 2,73 | 4,10 | 520 | 36 | 101,2 | 46,0 |
12 | 305 + 5,0 | 0,18 | 4,5 | 3,38 | 5,05 | 435 | 30 | 120,0 | 54,5 |
FUELMAN EXTRA
INTERNAL DIAMETER | WALL THICKNESS | WEIGHT | BURST PRESSURE | TENSILE STRENGTH | |||||
Inch | mm | Inch | mm | Lbs / Ft | Kg / m | Psi | Bar | x 1000 Lbs | Tons |
2 | 51 + 2,0 | 0.13 | 3,2 | 0,47 | 0,7 | 900 | 62 | 10,1 | 4,6 |
3 | 76 + 2,0 | 0.13 | 3,3 | 0,67 | 1,0 | 900 | 62 | 17,6 | 8,0 |
4 | 102 + 2,5 | 0.15 | 3,8 | 1,07 | 1,6 | 900 | 62 | 30,8 | 14,0 |
6 | 152 + 3,0 | 0.17 | 4,4 | 1,68 | 2,5 | 850 | 58 | 50,6 | 23,0 |
FUELMAN EXTREME
INTERNAL DIAMETER | WALL THICKNESS | WEIGHT | BURST PRESSURE | TENSILE STRENGTH | |||||
Inch | mm | Inch | mm | Lbs / Ft | Kg / m | Psi | Bar | x 1000 Lbs | Tons |
4 | 110,5 + 2,0 | 0,17 | 4,2 | 1,16 | 1,73 | 2500 | 172 | 178 | 80 |
5 | 135,5 + 2,0 | 0,18 | 4,5 | 1,64 | 2,45 | 2500 | 172 | 218 | 98 |
NOTE: Maximum working pressure is 25% of listed Burst pressure, i.e. SF 4:1. Ensure that the end coupling is designed for this working pressure. The Burst pressure listed is measured on a straight, free expanding hose according to ISO 1402. Tensile strength is calculated values. Operating Temperature range. -50 to + 50 ºC. Recommended operating pH range: 5 to 9.